Choke Knob Cover Chrome
No:29-300
€ 12
Πριν...
Ενδιάμεσα...
Μετά...
Οδηγίες Τοποθέτησης (installation):
1. Τραβάμε όλο το choke έξω.
2. Στο σύρμα του τσοκ τοποθετήστε το δακτύλιο με το σπείρωμα έξω (αν θέλετε βάζετε στο σπέιρωμα λίγο σιλικόνη).Βιδώστε το κάλυμα κρατώντας το δακτύλιο με το χέρι και με γαλλικό κλειδί Νο 16. Να είστε προσεκτικός, μην σφίγξτε πολύ και σπάστε το πλαστικό κάλυμα του τσοκ.3. Έλέγξτε αν το τσοκ κινείται πλήρως μέσα-έξω.
STEP 1 Pull the choke knob all the way out.
STEP 2 Place the choke knob cover over the stock choke knob and put a small amount of
silicone on the threads. Place the slotted lockplate over the choke cable and screw it into the
cover as far as it will go. The flats cut on the back of the lockplate permit the use of a 3/4”
wrench. Be careful, don’t over tighten and break the plastic knob.
STEP 3 Check to be sure the choke control can be pushed in all the way to the full
‘off’ position.
No comments:
Post a Comment